CPENT logoPower Cords · Connectors · Harnesses

Medical Cable Harness RFQ: What to Send and What a Supplier Can Actually Claim

By CPENT Technical Team · Updated

A medical cable harness RFQ should contain seven things: the drawing or a sample, the pinout, the connector part numbers, the cable construction, the electrical and mechanical requirements, the documentation you need, and the quantity per revision. Ask the supplier which quality system they are certified to, and read the certificate scope: ISO 9001 covers manufacturing process control, while ISO 13485 is a separate medical-device quality system that a cable supplier may or may not hold. CPENT is certified to ISO 9001 and builds harnesses to drawing; crimp pull-force records and continuity testing are available per the inspection plan agreed for the project. We do not claim ISO 13485 unless a certificate is provided.

The seven items in a complete RFQ

ItemWhat to sendWhy it matters
Drawing or sampleA dimensioned drawing (PDF/DWG) or a physical sample with the revision markedWithout a revision, the first article cannot be approved against anything
PinoutConnector pin number to wire colour/function, including unused pinsWiring errors are among the most common harness defects
ConnectorsManufacturer and part number, or an approved equivalent listSubstituting a connector changes mating, current rating and sometimes certification
CableConstruction (conductor size, cores, shielding), insulation material, jacket colour, outer diameter rangeJacket and insulation choice decides flexibility, temperature and flammability performance
Electrical and mechanicalContinuity, hipot voltage, insulation resistance, crimp pull-force, bend radius, expected mating cyclesThese become the inspection plan and the acceptance criteria
DocumentationWhether you need first-article report, crimp records, material declarations (RoHS/REACH), traceability by batchDocumentation is quoted separately; deciding late delays the order
Quantity and revisionsPrototype, pilot and production quantities, and how revisions are controlledTooling and fixture cost depends on volume; revision control prevents wrong builds

Reading a quality-system claim

ISO 9001 certifies how a factory controls its process. ISO 13485 is the quality system standard for medical devices; a cable assembly supplier may hold it, but many harness makers do not. If a medical device customer requires ISO 13485, ask for the certificate and check that the scope covers cable assembly, not only device manufacturing. CPENT holds ISO 9001:2015 (certificate 51326Q05266R053) and does not claim ISO 13485; when a project requires it, we say so before the sample stage rather than after.

Documents to ask for with the first article

Points to check before the first article

  1. Pinout given as a photo instead of a numbered table
  2. Connector part number missing the plating or keying suffix
  3. Cable outer diameter range not specified, so the strain relief does not grip
  4. No decision on whether unused pins are cut, capped or left open
  5. Label content and placement not specified, so traceability cannot be applied

Send your drawing and pinout and we will reply with the manufacturability points, tooling cost if any, MOQ and lead time. See also the custom harness range.

This guide is a buyer summary, not regulatory advice. Requirements depend on the device classification and the market; confirm with your quality and regulatory team.

Standards & official references

More guides

Need a specific model, plug standard or a custom cable?

Send us your drawing, sample or destination market. We reply with specifications, certificates, MOQ and lead time.

Request a Quote