How to Check a Power Cord Certificate: Model, Scope, Holder, Validity
By CPENT Technical Team · Updated
A power cord certificate approves a specific model, to a specific standard, for a specific market; the exact coverage is what the certificate and its annexes list. Before you accept a copy, check four things: the model number on the certificate matches the cord you are buying, the scope covers the cable type and rating, the holder is the actual manufacturer, and the certificate is still valid. A management-system certificate such as ISO 9001 is not a product approval and does not replace CCC, VDE, ETL, PSE or KC. CPENT supplies the certificate PDF and test report for the exact model on request.
The coverage of any certificate is what the certificate and its schedules list. Where a scheme, catalogue or certificate is unclear, confirm with the issuing body or your test lab; the table below is a buyer checklist, not a legal ruling.
The four checks
| Check | What to look for | Why it fails in practice |
|---|---|---|
| Model | The certificate lists the model designation, or a model list that includes your cord (for example CPT-15 plus the cable code) | Suppliers send a certificate for a sister model; the plug shape is the same but the contacts, fuse or cable are not covered |
| Scope | The standard, the rated voltage and current, and the cable types covered | Do not assume an approval carries over to a different cable construction or to a complete cord set; the approved combinations are the ones listed in the certificate and its schedules |
| Holder | The certificate holder and the approved manufacturing site match the company and factory on your purchase order | Seller, holder and manufacturing site can be three different entities; check which ones the certificate actually names |
| Validity | The certificate has not expired, and for marks under annual surveillance the latest surveillance report exists | An expired or suspended certificate is a common audit finding, so check the date |
What each mark covers
| Market | Mark | Applies to | Note |
|---|---|---|---|
| China | CCC | Plugs and cord sets | Cord sets sold in China are subject to CCC; confirm the scope of the current certificate for your product |
| USA / Canada | ETL or UL | Cord sets and connectors | CPENT holds ETL approvals; always read the model list |
| Europe | VDE, KEMA-KEUR, DEKRA | Products and configurations listed in each certificate | A plug certificate does not by itself approve the appliance end |
| Japan | PSE (DENAN) | Categories covered by the DENAN Act | Check the product category and the conformity route; do not infer coverage from the mark alone |
| Korea | KC | Models listed in the KC certificate or registration | Check the listed models and any permitted variations |
| Australia | SAA / RCM | Depends on the product and the certificate scope | The cited CPENT SAA certificate covers cable only, per that certificate |
| International | CB test certificate | Used as a basis for national approvals, where the destination scheme accepts it | A CB certificate is not a national approval by itself |
ISO 9001 is not a product approval
An ISO 9001 certificate, such as CPENT's 51326Q05266R053, certifies the quality management system: how the factory controls incoming material, first articles, in-process checks, final inspection and traceability. It says nothing about whether a particular plug model meets GB 1002 or CEE 7/7, and it cannot be used in place of CCC, VDE, ETL, PSE or KC. Buyers often ask for both: the system certificate for the factory audit, and the product certificates their market authority asks for. See our certifications page for the list CPENT holds.
Documents worth requesting
- Product certificate (PDF) with a model list that includes your cord
- Test report for the same model, from the same laboratory
- For cord sets: the plug certificate and the connector certificate, plus the cable approval
- Current ISO 9001 certificate and the last surveillance report
- Material declarations: RoHS, REACH, and where required a halogen-free statement
How CPENT handles it
Every quote can include the certificate set for the exact model. Where a market approval is not held, we say so before the order instead of forwarding a certificate that does not cover it. SAA at CPENT covers cable only, and we do not claim UL, IMQ, BSI or INMETRO approvals.
Need a certificate checked against your specification? Send the model and destination market to our sales team.
This is a buyer's summary, not legal advice. Requirements depend on the end product and change over time.
Standards & official references
- IEC — International Electrotechnical Commission
- EU Low Voltage Directive 2014/35/EU (EUR-Lex)
- VDE — German electrical engineering association
- UL Solutions — product safety certification
More guides
- Plug Types, Voltage & Frequency by Country
- IEC 60320 Connector Types Explained: C5, C7, C13, C14, C15, C19, C20
- Power Cord Cable Codes Explained: H05VV-F, 60227 IEC 53, SJT, SVT, VCTF
- Micro-Inverter & Solar AC Connectors: C20 vs C28 vs M25 vs Q28
- Which Safety Approval Does a Power Cord Need? Certification by Country
- Which Connector for Energy Storage and Micro-Inverters? Match the System Position First
- China GB Power Cords: How to Specify CCC, Cable Size, Length and Connector
- Medical Cable Harness RFQ: What to Send and What a Supplier Can Actually Claim